BETA Driver for MACBOOK laptops (v0.9b Driver for Video Output for USB docking stations)

IMPORTANT: This is a beta version, there are outstanding bugs (see note to users) and neither Technical Support nor Customer Service will be able to provide support with the driver installation and functions. Please download the user guide before installing the driver.

Computer Requirements: Mac OSX Tiger 10.4.11 and Leopard higher 10.5.2. Intel-based Apple computers including Mac Mini (Intel), iMac (Intel), MacBook, MacBook Pro, MacBook Air, and Mac Pro.

Supported Docking Models: 33367, 33415, 33907

Description:
This is a beta version of the driver necessary to enable the video output of the docking station and the dual monitor adapter when connected to a MAC computer. See supported docking station models below. Being a beta version, there are outstanding bugs (see note to users) and neither Technical Support nor Customer Service will be able to provide support for beta driver issues.

Beta Driver (v0.9b). Important Note to Users:

1. Disconnecting the dock will wake up your machine from sleep mode
2. DVD player will not work on external screen (video will be forced to play on notebook screen)
3. Presentation mode of software application will not work on the external screen (like keynote full screen presentation, iphoto slideshow, Front Row)
4. Video Responsiveness of connected external screen will be reduced. But still acceptable for everyday computing

For more details, download the release notes.

Installation Instructions:

A reboot of the machine is required to complete the driver upgrade. Close all the open applications saving your data before proceeding to the installation of the new driver.

1. Disconnect the docking station from your system.
2. Download the file and store it onto your hard disk drive.
3. Launch the displaylink installer by double-clicking the installer.
4. Once the installation is completed reboot the system if requested.
5. After the machine reboots connect the docking station to one of the USB ports of your system to complete the installation of the drivers.

For more information, please download the user guide.

Notebook Expansion Dock with Video (33367) & sd200v Notebook Docking Station with Video (33415) & Dual Monitor Adapter (33907) – Driver for Video Output (version release 4.3 - 8838)

Requirements:
Windows® XP, Service Pack 1 or Service Pack 2 (recommended) Windows Vista™ (see notes)

Description:
This is a new version of the driver necessary to enable the video output of the docking station and the dual monitor adapter. This is a major upgrade for users running Windows VISTA.

Version 4.3 features versus previous video driver versions:
› Includes support for Windows Vista™ Aero (3D effects like Flip 3D, Thumbnail preview)
› Improves video playback
› Provides user interface in the tools tray to configure the external monitor easier.
› Provides Automatic Software upgrade for future driver release

Supported Models: 33367, 33415, 33907

Instructions:

1. Disconnect the docking station from your system.
2. Download the file and store it onto your hard disk drive.
3. Click on the .zip file and use the "Browse" button to specify where you wish to extract and save the setup file to. Click the "Unzip" button to extract the setup file.
4. Go in the directory you specified in step 2. and launch the setup application by double clicking on the "Setup" file.
5. Once the installation is completed reboot the system if requested.
6. After the machine reboots connect the docking station to one of the USB ports of your system to complete the installation of the drivers: for Microsoft Vista™ a second reboot may be necessary to activate the video connected to the docking station.

Notes to users with version 3.x:

› To verify the revision of the SW driver select Start / Control Panel / Add or Remove Programs. Look for USB Display Adapter or Kensington Display Adapter and click on "Click here for support information" to retrieve the version of the driver.
› To uninstall the driver 3.x go to Control Panel / Add - Remove Programs and identify the USB Display Adapter: select the USB Display Adapter and click "Remove".

sd100 Notebook docking station (33419) USB to Ethernet Drivers

Requirements:
Windows® XP or Windows Vista™

Description:
This is the driver for Windows XP (32bit and 64bit) for the USB Ethernet function provided through the sd100 Notebook docking station (33419).

Instructions for the Windows® XP Version:

1. Disconnect the docking station from your laptop.
2. Download the file and store it onto your hard disk drive.
3. Click on the .zip file and use the "Browse" button to specify where you wish to extract and save the driver files to. Click the "Unzip" button to extract the driver files.
4. Connect the Kensington Docking Station to a USB port of your laptop.
5. When prompted by the "Found new hardware wizard", select the second option "Install from a list or specific location (Advanced) and select the directory specified in the point 3.

Instructions for the Windows Vista™ Version:

1. Disconnect the docking station from your laptop.
2. Download the file and store it onto your hard disk drive.
3. Click on the .zip file and use the "Browse" button to specify where you wish to extract and save the driver files to. Click the "Unzip" button to extract the driver files.
4. Connect the Kensington Docking Station to a USB port of your laptop.
5. When prompted by the "Found new hardware" message, select "Locate and install driver software (recommended)". Choose the option "Don't search online". Click Next when the message "I don't have the disk. Show me other options". Select the option "Browse my computer for driver software (advanced)" and select the directory specified in the point 3.

USB to Serial & USB to Ethernet Drivers for K33239

Requirements:
Windows VISTA

Description:
These drivers are available through Microsoft update and will be automatically installed on your laptop when you connect the K33239 docking station to a USB port or your laptop. Detailed Instructions are available below. These drivers are software that allows the Ethernet and Serial ports of your K33239 docking station to work.

Instructions:

1. Ensure your laptop is connected to the Internet.
2. Connect the Kensington Docking Station to a USB port of your laptop.
3. When prompted by the "Found new hardware wizard", select the first option - "Locate and install driver software (recommended)".
4. Your laptop will be searching Windows Update for latest drivers. Driver will be automatically downloaded and installed.
5. You might be prompted to Restart your computer.

Download:
Installation Screens are available for your Reference in the downloadable document
(InstallationScreensVISTADrivers.pdf)

5.1 USB Audio Driver for K33239

Requirements:
Windows VISTA

Description:
This driver allows the 5.1 audio ports of the K33239 docking station to work.
Note: The native audio driver provided by VISTA that may have been installed when you first connected the docking station to your laptop does not work with our K33239 dock.

Instructions:

1. Disconnect the docking station from your system.
2. Download the zip file (5.1 Audio Driver for VISTA.zip) and store it on your hard drive
3. Unzip the content onto a folder.
4. Double-Click on the "setup.exe" (you need to have administrator's right on your laptop)
5. Click Allow when prompted to continue the driver installation.
6. Connect the docking station to one of the USB ports of your laptop when requested**.
7. Restart the PC when prompted.
8. Download the audio setup instructions ("configuring_speakers.pdf") if you are going to connect a 5.1 speakers system to the dock.

**IMPORTANT: the driver must be reinstalled if the dock is reconnected to a different USB port then the one used for the first installation of the driver.

Download:
5.1 Audio Driver for VISTA.zip
configuring_speakers.pdf

Kensington Notebook Dock Audio Driver 1.0

Requirements:
Windows XP, Service Pack 1 or Service Pack 2

Description:
A self-extracting archive of the full version of Kensington Notebook Dock Audio Driver 1.0. Specifically:

› USB 3D Sound Configuration Version 5.12.01.0042 (62.2)

Notes:

› Provides full Audio 5.1 functionality to Windows XP, Service Pack 1 and Service Pack 2